Highlights

January 01, 2011
Bomar Crystal launches new and improved web site to facilitate the needs of High Tech Developers and suppliers alike. Bomar Crystal has agents and resellers throughout the country with its main manufacturing facility and warehouse in Middlesex, New Jersey. American made for the highest quality with world class personable support.

Jan 10, 2000
Bomar Crystal Certifies that all SMD crystals, SMD Oscillators, TCXO, OCXO, VCXO, VCTCXO, Clock Oscilator and Quartz Crystal products meet the European Union Initiative for RoHS Compliance

made in the usa
Made in
the USA

Contact Info
bomar crystal

Bomar Crystal
201 Blackford Avenue Middlesex, NJ 08846

Email: sales@bomarcrystal.com


Phone:
(732) 356-7787
(800) 526-3935

Fax:
(732) 356-7362

Plastic J-Lead Surface Mount Oscillator

Parameters Frequency Range Conditions Min Max Units
Frequency Range(Fo) - - 1.800 67.000 MHz
Frequency Stability 1.800 ~67.000 All Conditions* -100 +100 PPM
Temperature Range
Operating (TOPR)
Storage (TSTG)		 1.800 ~67.000 -
-10
-55
+70
+125		 ºC
Supply Voltage (VDD) 1.800 ~67.000 - +4.5 -5.5 V
Input Current (IDD) 1.800 ~32.000
32.000+ ~50.000
50.000+ ~67.000		 - - 27
45
60		 mA
Output Symmetry 1.800 ~50.000
50.000+ ~67.000 		2.5V 45
40		 55
60		 %
Rise Time (TR)
Fall Time (TF)		 1.800 ~67.000 0.5V to 4.5V
4.5V to 0.5V		 - 7
7		 nS
Output Voltage
(VOL)
(VOH)		 1.800 ~67.000 IOL=16mA
IOH=16mA		 4.5 0.5 V
Output Current
(IOL)
(IOH)		 1.800 ~67.000 VOL = 0.5V
VOH = 4.5V		 - 16
-16 		MA
Output Load 1.800 ~67.000 TTL
HCMOS		 - 10
50		 TTL
pF
Start-Up Time (Ts) 1.800 ~67.000 - - 10 mS
Enable/Disable Time 1.800 ~67.000 - - 100 nS

*Inclusive of 25ºC, tolerance, operating temperature, input voltage charge, load

*Inclusive of 25ºC, tolerance, operating temperature, input voltage charge, load change, aging, shock, and vibration
**An internal pullup resistor from pin 1 to pin 4 allows active output if pin 1 is left open
*Enable / Disable Function**
INB Pin 1 OUTPUT (Pin 3)
OPEN*** ACTIVE
T Level Vm = 2.2V ACTIVE
T Level VIL = 0.8V High Z
plastic oscillator
Inches(mm)

Note A 0.01uF bypass capacitor should be placed between pin 4 and pin 2 to minimize power supply line noise